Tag Archives: Satellite

Es’hail-2 satellite ground station

I am looking to put together a station for the Es’hail-2 geosynchronous satellite that is about to be launched. Amsat say:  “Qatar’s Es’hail-2 satellite will provide:  “… the first amateur radio geostationary communications that could link amateurs from Brazil to Thailand.”  It will have a narrow band linear transponder with a 2400.050 – 2400.300 MHz uplink and 10489.550 – 10489.800 MHz downlink plus a wideband digital transponder which I will not be using.

At the Microwave group stand at the RSGB convention last weekend I saw a domestic satellite LNB connected to an SDR RX running at 613Mhz. I have the RSP1A and want to try it with an LNB and a 100cm dish for the 10Ghz downlink. The uplink is a bit more complex and I can only think of making a 13cm transverters. There are some kits around, but they are not cheap, and I do not need the RX portion.

The ideal would be conversion of suitable commercial gear. I like to hear about any ideas, suggestions you have especially if you doing something similar. Use email ‘m5fra’ at this site address if you can help. Thanks.

Amateur Radio Transponders on Planned Chinese Satellites to Include HF

From: The ARRL Letter” 24 May 2018

China’s Amateur Radio Satellite organization, CAMSAT, has released some details of three new Amateur Radio satellites that could be launched as early as September. Two of the satellites, CAS-5A and CAS-6, will carry transponders; one will have HF capability.

CAS-5A, a 6U CubeSat, will have an HF/HF (21/29 MHz) mode linear transponder; an HF/UHF (21/435 MHz) mode linear transponder; an HF CW telemetry beacon; VHF/UHF mode linear transponder; a VHF/UHF mode FM transponder; a UHF CW telemetry beacon, and UHF AX.25 4,800/9,600-baud GMSK Telemetry. Transponders will have 30 kHz passbands, except for the H/U unit, which will be 15 kHz.

The tiny CAS-5B, weighing 1/2 kilogram, will be deployed from CAS-5A in orbit. It will carry a UHF CW beacon on an Amateur Radio frequency. It will be placed into a 539 × 533 kilometer, 97.5° orbit.

CAS-6, a 50-kilogram microsat, will include a VHF CW telemetry beacon; a U/V mode 20 kHz linear transponder, and AX.25 4,800-baud GMSK telemetry downlink. It will also carry an atmospheric wind detector and other systems that will operate on non-amateur frequencies.

A launch at sea is planned for CAS-6, which will be placed into a 579 × 579 kilometer, 45° orbit.

CAMSAT has applied to the IARU to coordinate frequencies for all three spacecraft. — Thanks to AMSAT News Service via AMSAT-UK