Tag Archives: QRP

Home construction, QRP, solar power 8 months on

When I came back to amateur radio in March 2018, I set myself some aims, more aspirations really.  I said that I wanted the station to be QRP, all homebrew and solar powered.

I have always enjoyed making stuff and now I have finally retired I have a lot of time to do just that. Second, I have previously thrown money at the hobby, got on the air and become bored.

QRP? Life is too short say the kilowatt cynics. Over the years I have enjoyed using a lot of small, home made radios with spectacular results. It takes more effort to winkle a signal out of the noise, but the rewards are bigger. Like many things in life it takes effort and patience to get results but the reward are higher.

uBITX

As the solar power I am trying to reduce my carbon footprint as I fear we are on the brink of a climate catastrophe.  You may not agree but I would urge you to read the evidence, from climate scientists, not newspaper articles, who agree that there is a big problem. Besides saving energy in the home saves money!

80w folding solar panels

So, 8 months on I am back on the air with a uBITX with the mods to reduce spurious emission and harmonics. Next is the AGC board. Using a LiPo battery I can get near 20W output but that is trimmed down to 5W. I also have a 20M QSX and am eagerly awaiting the launch of the multiband QSX.

20m QCX

The auto antenna tuner is nearly finished but in the mean time I have a 9:1 balun at the bottom of the antenna and an L match at the radio end. I can get below 1.5:1 from 106m to 10m which is fine for now.

The only thing to sort out now is a more permanent solar panel battery charging facility. I have the gear from ‘the van’ but want something more permanent.

Life is too short….

Last week I heard a QSO on 80M SSB where each op was using 400W and each gave the other 5-9+20db One op said ” I always use QRO, life is too short for QRP”. Reducing their power to ~6w would have resulted in report of 5-9+2db. Why waste so much power?

Interestingly I found this today on the North American QRP CW club web site; “According to Rich Arland, K7YHA (now K7SZ), in World Radio magazine (Feb. 1990, year 19, issue 89, pp. 46-47) the long-distance low power record is held by KL7YU and W7BVV using one micro-watt over a distance of 1,650 mile 10-meter path between Alaska and Oregon in 1970. This is the equivalent of 1.6 billion miles per watt.”

That is why I use CW with a 5W power output limit and often use much less. It takes more effort to work some stations and more skill and patience but the rewards are well worth it especially when using homebrew gear.

SW20