Tag Archives: homebrew

Home construction, QRP, solar power 8 months on

When I came back to amateur radio in March 2018, I set myself some aims, more aspirations really.  I said that I wanted the station to be QRP, all homebrew and solar powered.

I have always enjoyed making stuff and now I have finally retired I have a lot of time to do just that. Second, I have previously thrown money at the hobby, got on the air and become bored.

QRP? Life is too short say the kilowatt cynics. Over the years I have enjoyed using a lot of small, home made radios with spectacular results. It takes more effort to winkle a signal out of the noise, but the rewards are bigger. Like many things in life it takes effort and patience to get results but the reward are higher.

uBITX

As the solar power I am trying to reduce my carbon footprint as I fear we are on the brink of a climate catastrophe.  You may not agree but I would urge you to read the evidence, from climate scientists, not newspaper articles, who agree that there is a big problem. Besides saving energy in the home saves money!

80w folding solar panels

So, 8 months on I am back on the air with a uBITX with the mods to reduce spurious emission and harmonics. Next is the AGC board. Using a LiPo battery I can get near 20W output but that is trimmed down to 5W. I also have a 20M QSX and am eagerly awaiting the launch of the multiband QSX.

20m QCX

The auto antenna tuner is nearly finished but in the mean time I have a 9:1 balun at the bottom of the antenna and an L match at the radio end. I can get below 1.5:1 from 106m to 10m which is fine for now.

The only thing to sort out now is a more permanent solar panel battery charging facility. I have the gear from ‘the van’ but want something more permanent.

Why home construction?

I am often asked why I bother with home construction. Why make stuff when it is so easy to go out and buy it? The questioners sometimes go as far as asking why I waste my time.

There are lots of reasons; it is something I have always done, it saves a lot of money, you know your gear well so can repair it and most of all I learn something, sometimes the hard way!

All of that is summed up in this quote I found today:

“The excitement of learning separates youth from old age. As long as you are learning you’re not old” Rosalyn Sussman

First test of the remote ATU. The control box is the next job.

I am now eight months in to my aim to build a totally homebrew station. I am at the point of having some working transceivers, power supplies, an antenna analyser and a long wire antenna. The remote tuner is almost done but is proving troublesome. By the end of the year it will all be sorted!

Life is too short….

Last week I heard a QSO on 80M SSB where each op was using 400W and each gave the other 5-9+20db One op said ” I always use QRO, life is too short for QRP”. Reducing their power to ~6w would have resulted in report of 5-9+2db. Why waste so much power?

Interestingly I found this today on the North American QRP CW club web site; “According to Rich Arland, K7YHA (now K7SZ), in World Radio magazine (Feb. 1990, year 19, issue 89, pp. 46-47) the long-distance low power record is held by KL7YU and W7BVV using one micro-watt over a distance of 1,650 mile 10-meter path between Alaska and Oregon in 1970. This is the equivalent of 1.6 billion miles per watt.”

That is why I use CW with a 5W power output limit and often use much less. It takes more effort to work some stations and more skill and patience but the rewards are well worth it especially when using homebrew gear.

SW20

160m – Topband – best for solar mimimum

I was digging around on the net today looking for simple deigns for Topband,  160M gear.  I found this article saying that it was best for solar minimum:  “The 160-Meter Band: An Enigma Shrouded in Mystery” which first published in CQ magazine in 1998. Here is some of what it says:

“Topband is one of the last frontiers for radio propagation enthusiasts.”

“The correlation between sunspot numbers and signal strength is only about 5% as strong as the correlation on higher frequencies.

”There are several important components that can improve your chances of successfully working DX on Topband. […] The trick here is to wait for sustained intervals of quiet conditions over the high latitude regions.”

It used to be the band for local rag chewing and I get the feeling it is either classed as just that or seen as the preserve of DX chasers with huge antennas farms. It can be both, but we can all have fun on Topband over the coming years without the constant depression of low or non-existent sunspots. I have a 38m long inverted L and had reasonable results on 160M a few years back so please do not dismiss the band without giving it a try.

It also appeals to me because it was my first intro to amateur radio. I used to look out of my bedroom window across the road to an aerial pole in the back garden of the next street. It belonged to G3LIO, Jim Gibbs. He was the first licensed amateur that I knew, and he and his father were very generous in helping me to start short wave listening back in the mid-1960s.

I have a few projects to complete to get back on the air but over the coming months I will make some Topband gear and give it a try. It will be low(ish) power AM to begin with. I also like the idea of working /P with long wire antennas supported by tall trees. It is time to modify the catapult launcher!

A scratch build Wilderness radio SW-20

This is an amazing build of a favourite of mine, the Wilderness radio SW-20. It shows just how neat and effective ‘ugly’ construction can be. In my opinion it is far from ugly!

I would love another but they are no longer available. Maybe this is what I should do over the winter – build one!

It is interesting that he started with the case and cut the copper clad board to size. It seems like a very ordered way of working.

A Scratch-Build of N6KR and Wilderness Radio’s SST for 20M

I had one of these radios a few years back and made many contacts on it. I did some mods but cannot remember what the function of the extra knob on the left side.